SAFE WORKING LOAD OF A SLING v0.2

COMPANY:          PROJECT:      
ITEM NUMBER:  
Maximum Tension in the sling or total tension for all parts of the sling
SELECT: Wire Rope type, diameter and SWL @ 100% Efficiency
Number of parts being used, ie two parts for a doubled sling
Effeciency factor of the swaged fitting at the eye of a IWRC sling(%)
1" diameter and smaller95.0%
1-1/8" diameter thru 1-7/8"92.5%
2" diameter and larger90.0%
Diameter of the hook or "Other type of pin" Enter zero if not applicable
Diameter of the curved plate of the spreader bar Enter zero if not applicable
Diameter of the trunnion Enter zero if not applicable
Diameter of the shackle pin or sheave Enter zero if not applicable

Note:



OUTPUT:
Hook or "Other type of pin"/sling ratio
Curved plate/sling ratio
Trunnion/sling ratio
Shackle Pin or sheave/sling ratio
Efficiency factor of the sling over a hook or "other type of pin" (%)
Efficiency factor of the sling around the curved plate (%)
Efficiency factor of the sling around the trunnion (%)
Efficiency factor of the sling around a shackle pin or sheave (%)
Safe Working Load of the sling using the smallest efficiency factor
Reserve capacity of the sling above the maximum tension